Redline Communications RDL-2000 Manuel de service télécharger pdf (Page 18)

RDL-2000 Installation Guidelines

4.1.3 Installation Overview

The following diagram illustrates a typical RDL-2000 installation. When using flat panel

antennas, the RDL-2000 radio and antenna are both secured to the same mounting

bracket. When using parabolic antennas, the radio may be mounted separately. Power

and data are supplied to the RDL-2000 using an outdoor-rated Ethernet cable. The

power injector (PoE) must be located inside a weatherproof enclosure, with access to

reliable AC and connection to the local network. Optional surge arrestor may be ordered

and installed if there are concerns about damage from lightning strikes.

Surge protection must be provided where any outdoor cabling enters a

building. Refer to local building and electrical codes.

Figure 5: Installation - RDL-2000 System Components

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Pas de commentaire

Redline Communications RDL-2000 Manuel de service Page 18