Redline Communications RDL-2000 Manuel d'utilisateur Page 21
- Page / 51
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
RDL-2000 User Manual
70-00143-01-01 Proprietary Redline Communications © 2011 Page 21 of 52 March 9, 2011
User: Allowed only to view configuration and monitor the link status.
Password: Enter password for the selected user type.
Use Gateway: Check this box
to use the gateway. Valid only if a gateway IP address
has been specified using the menu item: Tools -> Select Adapter.
Login: Click this button to start a session with the RDL-2000.
3.2.7 Toolbar
Use this toolbar to access shortcuts to many common Link Manager functions.
Figure 10: Link Mgr - Main Toolbar
S: Start a new session. Clicking this button initiates a discovery scan to locate all
RDL-2000 units located on the selected network interface, Refer to menu item:
Tools -> Select Adapter).
E: Terminate the current session.
: Retrieve current settings from the RDL-2000.
: Reconnect automatically to the RDL-2000 if the session is lost for any reason (e.g.,
RDL-2000 reboots). Clicking this button toggles between enabled and disabled
state.
Notes:
1. It is recommended to disable this feature when changing the unit IP address, or
the master/slave mode.
2. While active, no other users are able to login to this RDL-2000.
3. There is no timeout for this function.
4. This selection is not altered by manually cycling the connection status.
EL: Enable logging of RDL-2000 event message.
Master Log Messages
Sec: Time (seconds) from last Master reboot.
C: PHY CRC errors (1 second sample time).
SN0/SN1: SNR values for RF port 0 and RF port 1 (located closest to
grounding terminal).
a: Current IIS value.
Peer: RSSI and PHY CRC errors (C) of the SU (5 second sample time).
s: Adaptive modulation sample number (UL/DL).
p: Total number of UL/DL CRC errors (C) during sample period (PER).
r: Current modulation: 0=BPSK, 1=QPSK 1/2, 2=QPSK 3/4, 3=16QAM 1/2,
4=16QAM 3/4 , 5=64QAM 2/3 , 6=64QAM 3/4, 7=64QAM 5/6
Slave Log Messages
Channel changed to CH#: Slave has changed the RF channel.
Channel # online MUID #: Slave has located a Master with the same link ID
and is changing mode to online.
Sec: Time (seconds) from last Slave reboot.
C: PHY CRC errors (1 sec sample).
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
- RDL-2000 1
- User Manual 1
- Copyright Information 2
- Disclaimer 2
- SUMMARY 3
- TABLE OF CONTENTS 4
- LIST OF TABLES 6
- LIST OF FIGURES 6
- 1 Important Notices 7
- 1.1.4 Lightning Protection 8
- 1.1.5 Product Information 9
- 1.2 Regulatory Notices 10
- RDL-2000 User Manual 11
- 1.2.2 UL Information 11
- 2 System Overview 12
- 2.1 Ethernet Ports 13
- 2.4 Antenna Alignment 14
- 2.2 RF Ports 14
- 2.3 Ground Connection 14
- 2.6 RF Jumper Cables 16
- 3 Link Manager 17
- 3.2 Menu Commands 18
- 3.2.3 Action Menu 19
- 3.2.4 Tools Menu 20
- 3.2.5 Help Menu 20
- 3.2.6 Login Bar 20
- 3.2.7 Toolbar 21
- 3.2.8 Unit Status Bar 22
- 3.3 Application Menu 23
- 3.7 Software Screen 33
- 3.8 Firmware Screen 34
- 3.9 License Screen 36
- 3.10 Spectrum Sweep 37
- 3.11 Tests 38
- 3.12 Ping 39
- 3.13 Debug 40
- 4 Troubleshooting 42
- 5 CLI Interface 44
- 5.2 Telnet Commands 45
- 6 Reference Information 50
Tecumseh AWG5517EXN manuals
Owner’s manuals and user’s guides for Unknown Tecumseh AWG5517EXN.
We providing 1 pdf manuals Tecumseh AWG5517EXN for download free by document types: Performance Data Sheet
Commentaires sur ces manuels